Water-based, acrylic neon colors. which emit a glow (fluoresce). Highly transparent, best applied over a white base such as Createx Opaque White or AutoBorne Sealer White.
Fluorescent colors are NOT lightfast. Colors will eventually fade due to exposure to direct light.

• Createx Airbrush Colors are primarily for use on absorbent surfaces.
• They are especially suitable for airbrushing onto fabrics such as t-shirts, leathers (eg. coats, shoes, bags), lycra.
• These paints, once heat set, are permanent and flex with the fabric they are sprayed onto.
• Once set they can be washed and exposed to water with no effect.
• They are professional grade ready for use Airbrush Colors which are manufactured with the highest quality control standards.
• All Createx Airbrush Colors are water-based, non-toxic and meet ASTM D-4236 standards.
• Colors cover semi-opaque sprayed direct from the bottle. Colors cover in 2 – 3 coats..
• Best sprayed with airbrush tip-sizes 0.3mm to 0.5mm at 25 – 40+ psi
• Use 5601 Transparent Base to extend paint for increased transparency while maintaining a higher viscosity compared with tihinning with excess amounts of 4011 Reducer.
• Thin with 4011 Reducer or 4021 New improved Reducer for use with smaller tip-sizes and lower psi settings
• Mix with 4030 Balancing Clear for fabric, leather, Vinyl for soft coating  or 4050 UVLS Gloss Clear for improved adhesion & durability onto plastics and other hard surfaces.
• See Createx Airbrush Technical Data Sheet below for more info

Water-based, acrylic colors made with pearlescent powders. Colors dry semi-gloss. Apply a top-coat such as Createx 4050 UVLS Gloss clear or 5604 Gloss Top coat for a vibrant pearlescent finish.

• Best applied over white, grey or black base, such as Createx Airbrush Opaque Colors
• Cover semi-opaque. Best applied over white, grey or black base.
• Best sprayed with an airbrush tip-size of 0.5mm at 35 – 45+ psi
• Use 5601 Transparent Base to extend paint for increased transparency while maintaining a higher viscosity compared with tihinning with excess amounts of 4011 Reducer.
• Thin with 4011 Reducer or 4021 New improved Reducer for use with smaller tip-sizes and lower psi settings
• Mix with 4030 Balancing Clear for fabric, leather, Vinyl for soft coating  or 4050 UVLS Gloss Clear for improved adhesion & durability onto plastics and other hard surfaces.
• See Createx Airbrush Technical Data Sheet below for more info